AirLink Wireless N 300 Ethernet Adapter Instrukcja Użytkownika

Wireless N 300 Multi-Function Access Point with 5-Port Switch Model # AP671W User’s Manual Ver. 1A

9Step 7 Select an operation mode for your Access Point and click Next. Step 8 Configure the settings for the operation mode you have selected.

10 B) Universal Repeater Click on Site Survey, select the wireless router or AP you wish to repeat on the popup Wireless Site Survey window and cli

11Wireless Site Survey Configure wireless security settings according to the root AP’s settings. The Security Key you enter must match with the one

12 Enter the key of the wireless network you wish to connect to. Click Next. D) Point-to-Point / Point-to-MultiPoint / WDS Bridge Same setup proced

13 Configure the wireless security settings. It is recommended to use WPA2-PSK(AES) which is the safest encryption for general users. Click Next. Af

14 Step 10 Click Finish to end the EZ Setup Wizard. After the AP is restarted, it is ready to use. To configure more advanced features, please go t

152.2 Accessing the Access Point by Web Browser The EZ Setup Wizard will guide you through the basic configuration for the Access Point. For more ad

162.3 View System Status and Information After you connected to the access point by web browser, the first thing you see is ‘Status and Information’

17Associated Clients Displays the number of connected wireless client. IP Address Displays the IP address of this wireless access point. Subnet M

182.4 Select an Operating Mode for Access Point This access point can be operated in different modes; you can click ‘Basic Setting’ on the left of w

1Federal Communication Commission Interference Statement FCC Part 15 This equipment has been tested and found to comply with the limits for a Class

19Please select one wireless operating mode, for detailed descriptions of every operating mode; please refer to Section 2.4.1 to 2.4.6 listed below.

20Band Please select the wireless band you wish to use. By selecting different band setting, you’ll be able to allow or deny the wireless client of

21This access point supports 4 sets of SSID. Besides the main SSID (It can be configure in Basic Setting page), you can configure another three SSIDs

22WMM WMM (Wi-Fi Multimedia) technology, which can improve the performance of certain network applications, like audio/video streaming, network tele

23 Here are descriptions of every setup item: Band Please select the wireless band you wish to use. By selecting different band setting, you’ll be

24procedures, or click “Apply” to reboot the router so the settings will take effect (Please wait for 30 seconds while router is rebooting). 242

25Mode Display the wireless modes include 11b, 11b/g or 11b/g/n or 11n only of the access points. Refresh Click this button to refresh the table.

26 Here are descriptions of every setup item: Band Please select the wireless band you wish to use. By selecting different band setting, you’ll be

27You can click “Continue” to back to previous setup page to continue on other setup procedures, or click “Apply” to reboot the router so the setting

28 Here are descriptions of every setup item: Band Please select the wireless band you wish to use. By selecting different band setting, you’ll be

2Table of Contents FEDERAL COMMUNICATION COMMISSION INTERFERENCE STATEMENT... 1 TABLE OF CONTENTS...

29 You can click “Continue” to back to previous setup page to continue on other setup procedures, or click “Apply” to reboot the router so the setti

30Diagram5:WDSBridgemodeapplicationWhen you select ‘AP Bridge-WDS’, the following options will be displayed: Here are descriptions of every s

31Associated Clients Click ‘Show Active Clients’ button and a new popup window will appear which contains the information about all wireless clients

32Diagram5:Repeatermodeapplication When you select ‘Universal Repeater, the following options will be displayed: Here are descriptions

33Band Please select the wireless band you wish to use. By selecting different band setting, you’ll be able to allow or deny the wireless client of

34 You can click “Continue” to back to previous setup page to continue on other setup procedures, or click “Apply” to reboot the router so the setti

352. Click ‘Set Security’ button when the wireless operating mode you selected is ‘AP Bridge-Point to Point’, ‘AP Bridge-Point to Multi-Point’, or ‘A

36 Here are descriptions of every setup item: Key Length There are two types of WEP key length: 64-bit and 128-bit. Using ‘128-bit’ is safer than

37 2.5.2 WPA Pre-Shared Key WPA Pre-Shared key is the safest encryption method currently, and it’s recommended to use this encryption method to ensu

38 Here are descriptions of every setup item: WPA Unicast Cipher Suite You can select WPA encryption type here. AES is safer than TKIP, but not eve

3Chapter 1 Introduction Congratulations on your purchase of AP671W, Airlink101 Wireless N 300 Multi-Function Access Point with 5-Port Switch! This p

39 Here are descriptions of every setup item: Use internal MD5/PEAP RADIUS Server Uses built-in RADIUS Server (refer to next Section) instead of ex

402.6 Set Up MAC Filtering Another security measure you can use to keep hackers and intruders away is ‘MAC filtering’. You can pre-define a so-call

41MAC address Input MAC address allowed using this wireless access point here. You don’t have to add colon (:) or hyphen (-) by yourself, just input

422.7 Configure Advanced Settings This wireless access point has many advanced wireless features. Please note that all settings listed here are for

43N Data Rate Set the data rate of 802.11 Draft-N clients, available options are MCS 0 to MCS 15, it’s safe to set this option to ‘Auto’ and it’s no

442.8 Configure WPS Setting Wi-Fi Protected Setup (WPS) is the simplest way to build connection between wireless network clients and this access poi

45Wi-Fi Protected Setup Information All information related to WPS will be displayed here, they’re helpful when you’re setting up connections by WPS.

462.9 Configure Radius Server Comparing to other wireless security measures, radius server provides user-based authentication. If your wireless clie

47User Profile If you want to enable the Radius Server on this AP, you need to configure a User Profile, a set of allowed users and their passwords

482.10 Management 2.10.1 Change the password of the AP You can change the administrator’s password used to enter the web configuration utility of

41.3 Access Point Interface Front Panel LEDs Back Panel Item Name Description Antenna Two 3dBi dipole antennas. Radio ON

49 Default IP address is: 192.168.2.250 / Subnet Mask 255.255.255.0, please configure the IP address to match your network setting and make sure thi

50 Here are descriptions of every buttons: Backup Settings Press ‘Save’ button, and you’ll be prompted to download the configuration as a file; de

512.11.2 Upgrade the Firmware for the Access Point If there are new firmware versions of this wireless access point available, you can upgrade the f

522.11.3 Reboot the Access Point When you think the access point is not working properly, you can use this function to restart the access point; thi

53Chapter 3 Troubleshooting If you found the access point is working improperly or stop responding to you, don’t panic! Before you contact your deal

54Appendix A - SpecificationStandards • IEEE 802.11b/g/n Operation Mode • 6-in-1: Access Point , Universal Repeater, AP Client, Point to Point and P

55 Technical Support  E-mail: [email protected] Toll Free: 1-888-746-3238 Website: www.airlink101.com  † The GPL op

51 ~ 5 Local Area Network (LAN) ports 1 to 5. Power Power connector DC 12V/1A, connects to A/C power adapter.

6Chapter 2 Configuring the Access Point 2.1 Installing the Access Point to Your Network Step 1 Insert the provided CD into your computer’s CD ROM

7 A. Connect the AP to the Router B. Power on the AP

8Step 4 Make sure the LEDs of POWER, WLAN and the LAN that is connected to the Router are lit. If not, try the above steps again. Step 5 Enter the A